Residential Repair
Drywall Repair in Shreveport, LA
A repair is only finished when you cannot find it. We match knockdown, orange peel and skip trowel textures so the patch blends into the wall instead of announcing itself.
Drywall Repair That Actually Disappears
If you need drywall repair in Shreveport, the hard part is almost never the hole. Cutting out damaged board, backing it, screwing in a patch and taping the seams is straightforward work that any competent crew can do. The part that separates a good repair from an obvious one is texture. Your walls already carry a finish that somebody sprayed years ago at a particular consistency, pressure and timing, and a patch that does not match reads as a bright rectangle from across the room even when the underlying work is sound.
That is the problem we solve. We repair the damage properly, then we match what is already there.
What's Included
Every drywall repair we quote includes the full sequence, not just the patch:
- Damage assessment. We identify why the damage happened, because a crack from foundation movement and a crack from failed tape need different responses.
- Cut back to sound material. Damaged board is removed to solid edges with proper backing added behind the opening so the patch has something to bear on.
- Patch, tape and three-coat finish. Tape bedded in compound, then two progressively wider coats feathered out, with full dry time between each.
- Sanding to a Level 4 or Level 5 finish, specified in writing on your quote depending on your paint sheen and lighting.
- Texture matched on a sample board first, then applied to the repair.
- Primer on the repaired area so the patch does not flash through your topcoat.
- Dust containment and cleanup, including plastic sheeting on openings and floor protection.
Painting the finished wall is available as an add-on. We will tell you honestly when a spot repair will be visible under your existing paint and a full wall repaint is the better call.
Signs You Need Drywall Repair
Not every mark on a wall needs a contractor. These do:
Cracks wider than a hairline, or cracks that keep coming back
A fine crack in a single spot is often just paint. A crack you can catch a fingernail in, or one that reopens in the same place after being patched, is structural movement or failed tape underneath. Repainting over it wastes the paint.
Bulging, soft or discolored areas
Softness means moisture is in the board. Gypsum loses its strength once saturated and does not recover when it dries. Any brown ring or soft patch needs the source found before the drywall is touched.
Rows of small round bumps
Nail pops in a vertical line are fasteners backing out as framing lumber dries and shrinks. Re-driving the same nail almost always fails a second time.
Corner damage that has been filled before
Compound applied on top of a bent corner bead cracks along the same line within a season. If a corner has been patched and cracked repeatedly, the bead itself needs replacing.
Our Process
Free written quote
We look at the damage in person or from photos and measurements, then send an itemized quote that names the finish level and the texture we will match. The number does not change after we start.
Protect the space
Floors covered, doorways sheeted in plastic, and furniture moved or wrapped. Drywall sanding produces fine dust that travels through a house if it is not contained at the source.
Cut back and reinforce
Damaged board is removed to sound edges and backing is added behind the opening so the patch is supported rather than floating on tape alone.
Tape and three coats
Tape bedded, then two wider coats feathered out, each allowed to dry fully. In humid conditions we extend the schedule or switch to setting-type compound rather than stacking coats.
Sand and match texture
Sanded to the specified level, then the texture is tested on a sample board beside your wall and adjusted before it is sprayed on the repair.
Prime and clean up
The repair is primed so it does not flash under paint, and we vacuum and wipe down before we leave.
Repair Options and What They Cost You Later
There is usually more than one way to handle a given repair, and the cheapest option is not always the one that saves money.
Spot patch versus full sheet replacement
A spot patch is faster and cheaper. It is the right answer for isolated damage in a wall with a forgiving texture. When damage covers a large share of a sheet, or when several patches would sit close together, replacing the full sheet from stud to stud gives you fewer seams and a flatter wall. More seams means more places for a future crack to start.
California patch versus backed patch
A California or butterfly patch uses the paper facing of the patch piece as its own tape, which works well for small holes and leaves a thinner buildup. Larger openings need wood or metal backing behind the board so the patch is mechanically supported. Using a California patch on an opening that is too large is a common shortcut that shows up as a cracked outline later.
Matching texture versus retexturing the wall
When an existing texture is unusual or heavily worn, matching it in one spot can be harder than retexturing the whole wall corner to corner. On a heavily patched wall we will often quote both, because a uniform new texture on one wall frequently looks better and costs less than five near-matches.
Drywall Repair in Shreveport Homes
Two local conditions drive most of the repair work we see in Shreveport, and both change how a repair should be approached.
The first is soil. Large parts of Caddo and Bossier Parish sit on clay-rich ground that swells when it takes on water and shrinks during a dry stretch. That movement transfers into the frame of the house and concentrates at the weakest points, which are the upper corners of door and window openings. Diagonal cracks radiating from those corners are the signature. If a crack there has been patched and has returned, the drywall is reporting a foundation and drainage issue, and we will say so rather than sell you the same repair a third time.
The second is humidity. Joint compound cures by giving up water to the surrounding air, and during a Gulf South summer the air is already holding a great deal of it. A crew working to a fixed three-day schedule regardless of conditions will stack a coat onto a joint that is not actually dry, and that joint will crack or show a seam months later. We schedule coats against real drying conditions and use setting-type compound when a job has to move faster than the weather allows.
What Affects the Price
Most single-room drywall repairs in the Shreveport area land between $200 and $750. Small patches sit at the low end, ceiling work and texture-matched repairs at the high end. These are the factors that actually move your number:
- Ceiling versus wall. Ceiling repairs cost more. The work is overhead, the finishing is less forgiving, and raking light across a ceiling exposes imperfections a wall would hide.
- Texture complexity. A smooth wall is straightforward. Matching an aged knockdown that somebody sprayed in 1998 takes test passes and skill.
- Number of separate locations. Five small holes in five rooms cost more than five holes in one room, because each location needs its own setup, containment and cleanup.
- Access. High ceilings, stairwells and tight spaces require staging and slow the work.
- Finish level. A Level 5 skim adds material and labor over a standard Level 4.
We quote in writing, itemized, before starting. If we find something behind the wall that changes the scope, we stop and talk to you before spending your money.
Get Your Free Drywall Repair Estimate. We Respond Within 2 Hours.
Send a photo and rough measurements and we can quote most repairs without a site visit. You get an itemized written price that names the finish level and the texture we will match.
Prefer to talk it through? Call (318) 666-5548.
Why Choose Us
Why Shreveport Chooses Us for Drywall Repair
Texture Matched Before It Touches Your Wall
We spray a sample board and hold it against your existing wall before committing to the repair, then adjust compound consistency and pressure until it reads the same. It costs about twenty minutes on our side. The alternative is a patch you notice every time you walk past it for the next decade, which is the single most common complaint homeowners have about previous drywall work.
Sample-board match on every textured repairWe Diagnose the Cause, Not Just the Damage
A crack from foundation movement, a crack from failed tape and a crack from a fastener problem look similar and need completely different responses. We identify which one you have before quoting. If the honest answer is that your drywall problem is actually a drainage or foundation problem, we tell you, because patching it again will not hold.
Cause identified in writing on every repair quoteFinish Level Specified in Writing
The Gypsum Association's GA-214 document defines drywall finish in six levels, from Level 0 to Level 5. Almost no residential contractor puts a number on the quote. We do, so you know whether you are getting a Level 4 under flat paint or a full Level 5 skim for gloss and critical lighting, and so there is no argument later about what was promised.
Gypsum Association GA-214 defines finish Levels 0 through 5FAQ
Drywall Repair Questions
How much does drywall repair cost in Shreveport?
Most single-room repairs run $200 to $750. Small patches such as doorknob holes sit at the low end. Ceiling work, large water-damaged areas, and repairs that require matching an existing knockdown or orange peel texture sit higher. We quote in writing before starting and the number does not move.
Can you match my existing texture?
Yes, and this is the part most repairs get wrong. Knockdown, orange peel, skip trowel and smooth finishes each need a different spray setup and technique. We test the match on a sample board held against your wall before touching the repair, then adjust until it reads the same.
How long does a drywall repair take?
A small patch is often a single visit. Anything requiring three coats of compound typically spans two to four days, because each coat has to dry fully before the next. Humidity extends that, and rushing coats is the most common cause of a repair cracking later.
Do I need to repaint the whole wall afterward?
Sometimes. If your paint is more than a few years old it has faded and a spot repaint will show as a slightly different shade even with the exact original color. We prime every repair and will tell you honestly whether a spot touch-up will blend or whether painting corner to corner is the better result.
Why does the same crack keep coming back?
Because the movement causing it has not stopped. Recurring cracks at door and window corners usually mean the foundation is still moving with the seasons in our clay soil. Patching treats the symptom. If a crack has returned more than once we will tell you to address drainage and foundation first.
Do you handle small jobs?
Yes. We do not carry a minimum-day charge for small residential repairs. A single hole is a legitimate job and we would rather do it well than turn it away.
Service Area
Drywall Repair Near You
We cover drywall repair across Shreveport and the surrounding parishes. Each area page covers what is specific to that community's housing and conditions.
Related Services
Patching & Hole Repair
Doorknob holes, TV mount damage, cable and outlet cutouts. Small jobs handled without a minimum-day charge.
Learn more →Drywall Texturing
Knockdown, orange peel, skip trowel and smooth Level 5 finishes, sprayed and matched to existing walls.
Learn more →Water Damage Repair
Roof leaks, plumbing failures and storm damage. Wet board removed back to sound material, framing verified dry.
Learn more →Not what you were looking for? See all drywall services or learn more about us.
Ready to get started?
Free written estimate, itemized before anything begins. We respond within 2 business hours.
Get a Free Quoteor call (318) 666-5548